Verified: July 2026  ·  Source: Nepal Telecom Official + NTC Connect App  ·  All codes tested on active Namaste SIM
📱 NTC Nepal · Official Codes 2026

All NTC USSD Codes List 2026
— Balance, Data, Loan & Services

Every USSD shortcode for Nepal Telecom (NTC) Namaste SIM in one place. Balance check, data packs, emergency loan, call forwarding, balance transfer — all verified July 2026.

⚡ *400# Balance 📦 *1415# Data Packs 🆘 *1477# Emergency Loan ↔️ *422# Balance Transfer 📡 *1416# Fiber/FTTH
⚡ Quick Answer — NTC USSD Codes 2026

The three most-used NTC USSD codes in Nepal are: *400# to check your main balance and validity, *1415# to browse and activate data packs and combo offers, and *1477# to access the Namaste Credit emergency loan when your balance runs out. All codes work by dialing them like a phone number — type the code, press the green call button, and the service menu appears on your screen in seconds without consuming any main balance.

*400#
Check Balance
*1415#
Data Packs
*1477#
Emergency Loan
*9#
Own Number
*922#
SIM Owner ID
*1416#
FTTH/Fiber

📋 Complete NTC USSD Code List — All Services 2026

Service CategoryPurposeUSSD Code / SMS CommandHow to Use
📋 Account & SIM Information
Main Balance CheckMost UsedView current balance, validity date, and bonus credits*400#Dial — free, instant
Check Own NumberDisplay your NTC mobile number on screen*9#Dial — free
SIM Owner IdentityCheck which name the SIM is registered under*922#Dial — free
SIM Registration StatusVerify if SIM is fully registered with biometricsSMS: STATUS to 1415SMS — standard rate
📦 Data Packs & Offers
Latest Offers & Data PacksKey CodeBrowse all current NTC data packs, combo offers, validity packs*1415#Dial — free
Add-on / Bonus PackagesActivate add-on data, voice, SMS packages*1442#Dial — free
Check Active Data PackSee remaining MB/GB in your active data packSMS: BAL to 1415SMS — standard rate
Buy Data via AppPurchase data without USSD — zero data chargeNTC Connect AppApp — recommended
🆘 Emergency Loan & Balance Transfer
Namaste Credit (Emergency Loan)PopularBorrow रू ५–१०० when balance runs out. Auto-deducted on next recharge*1477#Dial — eligibility auto-checked
Balance TransferSend balance from your SIM to another NTC number*422*CODE*NUMBER*AMOUNT#Dial — requires security code
Get Balance Transfer Security CodeRequest your SCODE for balance transfer activationSMS: SCODE to 1415SMS — one-time setup
📞 Call Services & Forwarding
Unconditional Call Forward (Activate)Forward ALL calls to another number always**21*Number#Dial
Unconditional Forward (Deactivate)Turn off all call forwarding##21#Dial
Forward When BusyForward calls when you’re on another call**67*Number#Dial
Forward When UnreachableForward calls when phone is off or out of coverage**62*Number#Dial
Forward When No AnswerForward calls when you don’t pick up**61*Number#Dial
Check Call Forward StatusSee all active forwarding settings*#21#Dial
Deactivate All ForwardingRemove every call forward in one code##002#Dial
🔔 Missed Call Alert & Notifications
Missed Call Alert (Activate)UsefulGet SMS notification when someone calls while phone is off/unreachable*1400*1# or SMS: Sub to 1400Dial or SMS
Missed Call Alert (Deactivate)Turn off missed call alert service*1400*2# or SMS: Unsub to 1400Dial or SMS
🌐 FTTH / Fiber Internet
FTTH Balance & QueriesCheck fiber internet account balance, plan details, validity*1416#Dial — free
FTTH RechargeTop-up your NTC fiber/FTTH accountNTC Self Care Portal or NTC Connect AppApp/Web
💳 Recharge & Customer Care
Scratch Card RechargeTop-up balance using a physical recharge card PIN*402*PIN#Dial
NTC Customer CareCall NTC helpline for complaints and queries1498 or 9804 254 000Dial — toll free from NTC
Do Not Disturb (DND)Block promotional SMS and callsSMS: START to 1909SMS
Remove DNDRe-enable promotional messagesSMS: STOP to 1909SMS

🆘 How to Take NTC Emergency Loan (Namaste Credit)

Namaste Credit is NTC’s emergency balance loan service — activated via *1477# — that lets you borrow a small amount of talk-time credit when your balance is zero or too low to make a call. The system checks eligibility automatically in real time. You do not need to call customer care or visit an NTC office.

Step-by-Step Process

Open your phone dialer and type *1477# then press the green call button.
A menu appears on your screen showing available loan amounts. These are dynamic — meaning not every user sees the same options. NTC calculates your eligible amount based on your SIM age, recharge history, and usage patterns.
Select your preferred loan amount by replying with the corresponding menu number. Typical amounts range from रू ५ to रू १०० depending on eligibility.
A small service charge is applied (usually 10-15% of borrowed amount). The total borrowed amount plus service charge is automatically deducted from your very next recharge — you do not need to repay manually.
You receive an SMS confirmation of the loan amount credited to your account. The credited balance works for calls, SMS, and data at standard rates.
⚠️
Eligibility rules: Your NTC SIM must be at least 3 months old. Frequent rechargers with regular usage history get higher loan limits. New SIMs and SIMs that were recently used for emergency credit may not immediately qualify again. If *1477# says “Not Eligible”, recharge once and try again after 24-48 hours.

↔️ How to Transfer Balance on NTC

NTC balance transfer lets you send credit from your Namaste SIM directly to another NTC number using the code *422*SecurityCode*ReceiverNumber*Amount#. The security code (SCODE) is a personal 4-digit PIN that protects your transfers from unauthorized use.

Complete Balance Transfer Process

First, get your SCODE: Send SMS “SCODE” to 1415. You will receive a 4-digit security code by return SMS. This is a one-time setup unless you request a new one.
Dial the complete transfer code: *422*[YourSCODE]*[ReceiverNTCNumber]*[Amount]# — example: *422*1234*9851XXXXXX*50#
Press call. You will receive an SMS confirming the transfer. The receiver gets an SMS too. A small service charge (usually रू १ per transfer) is deducted from your balance.
ℹ️
Rules: Minimum transfer amount is रू १०. Maximum per day depends on your account tier. Both sender and receiver must be active NTC prepaid numbers. You cannot transfer borrowed Namaste Credit balance — only actual recharged balance is transferable.
💡 Pro Tip — What Other Blogs Don’t Tell You

The most common reason balance transfers fail in Nepal is that people try to use the default SCODE that came with their SIM years ago — which may have expired or never been set. The fix is simple: send “SCODE” to 1415 right now to request a fresh security code before attempting any transfer. Your new SCODE arrives in under 60 seconds by SMS. Reset it once and save it in your contacts as “NTC Transfer Code”. This eliminates 90% of balance transfer errors Nepali users face.

Second tip: If the USSD session times out mid-transfer (common in crowded areas), do not dial again immediately — check your balance first via *400#. The transfer may have actually gone through even if you didn’t see the confirmation screen.

📞 NTC Call Forwarding — All Codes Explained

NTC supports four types of call forwarding. Each serves a specific scenario. Use the table below to activate exactly the type you need — and always deactivate when done, as forgotten forwarding can confuse callers and accidentally run up charges on the receiving number if it’s a landline.

Unconditional Forward — All Calls Always
**21*9801XXXXXX#
Redirects every incoming call to the number you specify, regardless of your phone’s status. To turn off: ##21#
Forward When Busy — On Another Call
**67*9801XXXXXX#
Only redirects when you’re already on a call. Useful for business users who don’t want to miss calls during active conversations.
Forward When Unreachable — Phone Off / No Signal
**62*9801XXXXXX#
Triggers when your phone is switched off, in airplane mode, or has no NTC network coverage. Great for remote area travelers.
Forward When No Answer
**61*9801XXXXXX#
Redirects after your phone rings a set number of times without being answered. Default is ~15-20 seconds. To cancel all forwarding at once: ##002#
⚠️
Important: Replace 9801XXXXXX with the actual NTC number you want to forward to. Call forwarding to non-NTC numbers (Ncell, landlines) may incur additional charges. Always check active forwarding status with *#21# before troubleshooting missed calls.

📶 How to Check Remaining NTC Data Volume

This is one of the most common points of confusion for NTC users. Many people assume dialing *400# shows remaining data — it does not. *400# shows only your main cash balance and validity. Your data pack usage is tracked separately.

Three Ways to Check Remaining NTC Data

SMS Method (Fastest): Send SMS “BAL” to 1415. You will receive a reply showing your active data pack name, remaining MB/GB, and expiry date. Standard SMS charge applies.
USSD Method: Dial *1415# and navigate to “My Account” or “Check Balance” option in the menu. This shows your active subscriptions including data pack remaining volume.
NTC Connect App (Best Method): Download the NTC Connect app (available on Android and iOS). Login with your NTC number — it shows real-time remaining data, validity, and upcoming expiry alerts. Checking via app uses zero data charge as it connects over NTC’s internal network.
💡
Why you might be losing balance unexpectedly: When your data pack expires or runs out of MB, your phone automatically switches to pay-as-you-go data at NTC’s standard rate (typically रू ३-५ per MB). This drains main balance rapidly. Always track your pack expiry via the app or SMS BAL to 1415 — and enable data pack auto-renewal where available.

🌐 NTC FTTH/Fiber Internet Codes

If you have NTC FTTH (Fiber to the Home) broadband, the dedicated code is *1416#. This is separate from the mobile SIM codes and is used to check your fiber account balance, current plan, usage, and validity. You must dial this from the mobile number registered to your FTTH account for it to work.

ℹ️
For FTTH recharge and plan upgrades, NTC recommends using the NTC Self Care portal (selfcare.ntc.net.np) or the NTC Connect app rather than USSD — the portal gives a complete dashboard of your fiber account, usage graph, and payment history which USSD cannot show.

❓ Frequently Asked Questions — NTC USSD Codes

Do NTC USSD codes cost money to dial?+
Most NTC USSD codes — including *400# (balance), *1415# (data packs), *9# (own number), and *1477# (emergency loan) — are completely free to dial and do not deduct from your balance. Only some SMS commands (like BAL to 1415) cost a standard SMS rate. Always check NTC’s official site for any service that actually activates a paid subscription.
Why is my NTC USSD code not working?+
Common reasons: (1) SIM not fully registered — complete biometric registration at any NTC office. (2) Network congestion — try after a few minutes or move to better signal. (3) Airplane mode is on. (4) Some codes only work when SIM is active (not suspended). If *400# fails, call 1498 (NTC helpline). Also try turning phone off and on to refresh SIM registration.
How do I buy a data pack on NTC without internet?+
Dial *1415# — this is a USSD code that works on voice network only, requires no internet connection. Navigate the menu to select your desired data pack and confirm. The pack activates immediately and you receive a confirmation SMS. This method works even with zero MB remaining in any data pack.
What is the NTC balance transfer limit per day?+
Standard NTC prepaid accounts can transfer up to रू ५०० per day in total. Minimum per transfer is रू १०. A service charge of approximately रू १ applies per transfer. You can do multiple transfers in a day as long as the cumulative total does not exceed the daily limit. Transferred balance cannot be re-transferred by the receiver — it must be used for calls/data.
How to activate NTC 4G/5G on my SIM?+
NTC 4G activates automatically if your phone supports 4G and you’re in a coverage area — no USSD code needed. For 5G (available in select Kathmandu areas in 2026), ensure your phone is 5G compatible and set network mode to 5G/Auto in phone settings. If 4G is not working despite coverage, dial 1498 or visit an NTC office to request SIM upgrade if you have an old 2G/3G-only SIM card.

💡 Pro Tips for NTC Users in Nepal 2026

Save these 3 numbers in your contacts right now: “NTC Balance” = *400#, “NTC Data Packs” = *1415#, “NTC Emergency” = *1477#. Saving USSD codes as contacts means one tap instead of typing.
📱
Use the NTC Connect App for everything that requires browsing — it loads faster than USSD during peak hours, shows your full account dashboard, and checking via app consumes zero data on NTC network.
Night data packs (12AM-6AM) offer the best GB-per-rupee ratio from NTC. Activate via *1415# and schedule large downloads, updates, or streaming for overnight hours to maximize value.
⚠️
Always check balance before international roaming — NTC charges are significantly higher outside Nepal and a forgotten open data session can drain hundreds of rupees. Dial *400# before and after crossing any border.

🔗 Related Telecom & Tech Guides